Universal Remote Control

LCD/LED TV Remote Controller
Operating Instructions

Notes on Batteries

1. Do not mix old batteries with new ones or different types of batteries together.
2. If the remote doesn’t work during use, please replace all the batteries.
3. When the remote contains no self-batteries, please remove the batteries.

How to Set Up Your Remote

A. Set Up by Code

Step 1:
Press [MUTE] + [POWER] buttons together for 3 seconds until the LED light is lit, then release it.

Step 2:
Input your 3-digit TV CODE from the code list.

• If the code is correct, the LED light will go off.
• If the code is wrong, the LED will stay on. Try re-entering the code.

Common TV Codes:

Step 3:
Check the functions of the remote. If it doesn’t work well, try another code and repeat from Step 1.

B. Brand Search

1. Turn on your TV.
2. Press and hold the brand button for 5 seconds.
   • The LED flashes 3 times → setup is complete.

Brand Key Table (examples):

• VESTEL
• SEIKI
• INSIGNIA
• SANYO
• RCA
• SAMSUNG
• LG
• PHILIPS
• TOSHIBA
• TCL
• JVC
• Haier
• MAGNAVOX
• SONY
• SHARP
• PANASONIC
• HISENSE
• WESTINGHOUSE

Default Mode

• Under the default setting, the RC-G008 remote can directly control many brands, including:
  LG / SAMSUNG / SONY / PHILIPS / PANASONIC / SHARP / TCL
• To restore to the initial setting, press and hold [OK] + [0] for 5 seconds.
  • The LED light will blink four times, confirming reset.